The Corroless® range includes coatings based on unique anticorrosive pigment technology, incorporating special rust stabilisation agents and modified glass flake.

Corroless® systems have been shown to stabilise rusty surfaces and give much higher and longer lasting anticorrosive protection than comparative paint systems.

Corroless® rust stabilisers have a fundamentally different chemical action from common 'rust converters', which can often lead to blistering and premature breakdown. Corroless® rust stabilisation is a process which occurs gradually over many months, but the effects of which last for many years.

The incorporation of special glass flake pigment into Corroless® products provides additional benefits of barrier protection, increased toughness and increased chemical resistance.

Corroless® vapour phase inhibitors are supplied in a variety of different forms and are typically employed for the 'moth-balling' of sensitive equipment, offshore oil installations etc., and the temporary protection of metal components during manufacture, delivery and storage.

Full product details and Project Specifications are available from our network of Corroless regional offices worldwide. A brief description of our core product range is given below.


Corroless RUSTKILLER - general purpose, single pack rust stabilising primer, sold for many years in the retail/DIY/automotive markets in specific countries.

Corroless S - general purpose, single pack rust stabilising primer.

Corroless SHB - single pack, high build, rust stabilising primer.

Corroless QDR - quick drying, single pack rust stabilising primer.

Corroless T - single pack, petroleum-resin based rust stabilising primer.

Corroless E - two pack epoxy rust stabilising primer.

Corroless EPF - high build, solvent-less two pack epoxy, tar-free, rust stabilising primer.

Corroless EP - high build, solvent-less two pack epoxy, rust stabilising primer.


Corroless RF15 & RF16 - single pack modified alkyd gloss finishes.

Corroless RF30 & RF31 - two pack epoxy intermediates or finishes.

Corroless RF60 & RF61 & RF65 - two pack polyurethane finishes, gloss and semi-gloss.


Corroguard 595 - solvent-free, two pack epoxy tank lining, approved by Drinking Water Inspectorate for use with potable water.

Corroless RF35 - two pack epoxy, solvent-less tank lining, approved for e.g. potable water, bulk fuel tanks, etc.

Corroless EPF & EP - two pack epoxy, rust stabilising coatings for e.g. ballast tanks, sewerage tanks, etc.


Corroless 570 Primer Sealer - clear, two pack epoxy, solvent free floor sealer.

Corroless 570 Floor Coating - solvent free, heavy duty, two pack epoxy floor coating.


Corroless CCI 200 - clear VCI coating.

Corroless CCI 250 - concentrated, water borne VCI coating and hydrotest additive.

Corroless CCI 300M - VCI additive for lubricating and hydraulic oils.

Corroless CCI 350 - lubricating, anticorrosive VCI grease.

Corroless CCI 355 - heavy duty, anticorrosive VCI lithium grease.

Corroless CCI 400 - anticorrosive VCI wax coating for exterior use.


Corroless CCI Powder - VCI in powder form for protection of complex equipment and pipework.

Corroless CCI-V1 Pad - VCI device in the form of a self-adhesive, impregnated sponge pad, to protect up to 1 cu.ft.

Corroless CCI-V12 Pot - VCI device, containing VCI inhibitor, consisting of a self-adhesive plastic pot, with a special breathable-membrane lid, to protect up to 12 cu.ft.

Corroless CCI-V100 Tape - VCI impregnated, self-adhesive sponge strip in roll form, for use in a variety of applications.

The above gives an indication of the Corroless core product range. Various ancillary items are also available and new products are constantly in development.